Little is more frustrating than requiring a working HVAC during the hottest summer and coldest winter. Learning about the topic means being able to make decisions down the road. Read on to learn about that.
Tour your home before calling a contractor. Make a list of the temperatures in each room and whether they are hot or cold. That way, the contractor will have an easier time diagnosing the problem and repairing it fast.
Know what you need before you hire a contractor. A contractor cannot give an accurate estimate without looking at your system. It can be harder if you don’t know what’s wrong. It’s important to know this beforehand.
Clean the coils and blades in your condenser at the beginning of summer. Turn off the power if you are going to work on your HVAC system. Also, make sure you remove any debris or leaves from the condenser unit outside.
Clean the debris on your condenser units. Wind can pile up all sorts of debris against its grill. Overheating can occur, which often spells disaster for your system.
Every spring you need to make sure your condenser fan’s coils and blades on the fan part are clean. Shut the power off before you do anything. Remove the grill and carefully clean the blades and surrounding areas.
When you’re trying to cut your grass, don’t cover a unit outside with the clippings. Make sure you shoot the clippings in the other direction from the unit. This includes grass clippings and leaves.
Your outdoor HVAC units might suffer when your trees lose leaves. During this time of year, check and clear off the fan grill on your unit on a regular basis. The fan needs to have an unobstructed path for air to enter the unit, and if it becomes blocked, you will end up with many headaches with the unit.
Many homeowners forget to oil their condenser at least once per year, but it is required. You can find these ports covered with rubber or metal caps. Use SAE 20 oil that is non-detergent and lightweight, and put 10 drops or fewer in each port, but make sure to avoid overfilling them.
Your HVAC system should be checked a few times a year. Your system should be inspected in Spring and Fall. Even if you can’t see anything wrong, checking it may help you locate and repair some possible issues.
When colder weather arrives, switch off all outdoor condenser units. Once the temperature drops into the 50s, the unit should no longer be on. This can keep your system working for years and save you a lot on repairs.
Install a thermostat you can program to save money on cooling your home. A thermostat that’s programmable is going to save you around ten percent on the heating and cooling costs you have to pay when you turn it back about fifteen percent for a part of the day. Also, you’ll find that you can program your thermostat from a computer or anything connected to the web.
Having to use a HVAC contractor might be daunting if you don’t have proper information. But, with the right tips, you will know how to find a professional you can trust. You should be ready to run to the next HVAC service and get the job done now that you’ve read this article.